![°ÄÃÅÐþ»úͼ-water-analysis-header.jpg](/imported-media/3316/rps-water-analysis-header.jpg?width=830&height=533&quality=90)
Water analysis
We provide a complete water analysis service for our clients, from project management, sampling services, refrigerated transport, analysis, data management and reporting. This provides peace of mind as they receive high quality data within their expected timescales.
![°ÄÃÅÐþ»úͼ-water-analysis-2.jpg](/imported-media/3317/rps-water-analysis-2.jpg?width=800&height=800&quality=100)
Our experience with water analysis
Our testing covers the full range of analyses, from routine environmental pollutants through to priority pollutants, emerging contaminants and endocrine disrupting chemicals (for example, PFAS, Dechloranes, Chloroalkanes, Antimicrobials and Olfactory parameters).ÌýOur methods are also set up to cover ground waters, surface waters, influents, effluents and leachates.
We have decades of deep expertise in water analysis having worked alongside a number of water utility companies on their Chemical Investigation Programme (CIP) testing, through CIP1, CIP2 and CIP3. We also work for a number of other clients ranging from other consultancies through to the Environment Agency, Defra, Natural Resources Wales and the UK Water Industry Research body UKWIR.
Our laboratories specialise in trace and ultra-trace analysis of priority pollutants and emerging contaminants and our site teams provide sampling and refrigerated transport of samples in compliance with various regulatory guidelines.
The laboratories hold ISO/IEC 17025 accreditation for a range of priority pollutants in water to comply with Environmental Quality Standards (EQS) and the Water Framework Directive (WFD).
Ìý
Ìý
Chlorinated paraffins (CPs) are complex mixtures of polychlorinated n-alkanes. The chlorination degree of CPs can vary between 30 and 70 wt%. CPs are subdivided according to their carbon chain length into short chain CPs (SCCPs, C10–13), medium chain CPs (MCCPs, C14–17) and long chain CPs (LCCPs, C>17). Depending on chain length and chlorine content
SCCPs are primarily used in metalworking applications and in polyvinyl chloride (PVC) processing. SCCPs are also used as plasticizers and flame retardants in a variety of applications, including in paints, adhesives and sealants, leather fat liquors, plastics, rubber, textiles and polymeric materials. SCCPs are sufficiently persistent in air for long range transport to occur and appear to be hydrolytically stable. Many SCCPs can accumulate in biota. It is concluded that SCCPs are likely, as a result of their long range environmental transport, to lead to significant adverse environmental and human health effects.
SCCP’s have now been listed as a POP under the Stockholm Convention and under the European Water Framework Directive an Environmental Quality Standard (EQS) has been set at 1.4ug/L in water. °ÄÃÅÐþ»úͼ can test for SCCPs in surface water and waste water in line with the required WFD EQS of 1.4ug/L
The Water Framework Directive (WFD) was adopted by the EU in 2000 to halt and reverse the trend of declining water quality measured across Europe. It will direct management of the aquatic environment in Europe for the foreseeable future.
To effectively protect the water environment, river basin management planning is integrated and coordinated with other European and national policies. These include land use and spatial plans, conservation plans, water services plans, pollution reduction plans and programmes, licensing of polluting sources, and cost recover y regimes. The Water Framework Directive sets out a strategy against pollution of water and has several daughter directives which outline specific steps to be taken regarding certain compounds. The Priority Substances Directive was one of the first strategies established by the WFD.
°ÄÃÅÐþ»úͼ have a significant presence in the water sector with over 65 offices through the UK and Ireland.
The Priority Organic Pollutants (POPs) are organic compounds identified among those presenting a significant risk to, or via the aquatic environment. These compounds were highlighted at EU level and are listed in Annex X to the Water Framework Directive (WFD) 2000/60/EC. The priority list is reviewed every 4 years by the EU via a review of the Environmental Quality Standards Directive (EQSD) 2008/105/EC in which environmental quality standards are set.
Our specialist trace organics laboratory focuses on low-level pesticides in environmental samples and routinely tests the POPs having gained significant experience and expertise in their analysis over the last decade.
We have an active R&D programme continually striving to improve and enhance existing analytical methodology as well as developing techniques for the analysis of the new compounds that are added to the list.ÌýIn addition to providing analytical services, °ÄÃÅÐþ»úͼ can provide:
- Sample containers
- Coolboxes
- Bespoke chain-of-custody
- Import licenses
- Global coverage
- Help and advice on sampling procedures
The current chemicals are but not limited to:Ìý
- 1,2-Dichloroethane
- 17a-ethinylestradiol
- 17ß-±ð²õ³Ù°ù²¹»å¾±´Ç±ô
- Aclonifen
- Alachlor
- Anthracene
- Atrazine
- Benzene
- Brominated Diphyenylethers
- Cadmium and its compounds
- Chlorfenvinphos
- Chloroalkanes C10-13
- Chlorpyriphos
- Cybutryne
- Cypermethrin
- DEHP
- Dichlor vos
- Dichloromethane
- Diclofenac
- Dicofol
- Dioxins
- Diuron
- Endosulphan
- Epoxide
- Fluoranthene
- Heptachlor and Heptachlor
- Hexabromocyclododecanes
- Hexachlorobenzene
- Hexachlorobutadiene
- Hexachlorocyclohexane
- Isoproturon
- Lead and its compounds
- Mercur y and its compounds
- Naphthalene
- Nickel and its compounds
- Nonylphenols
- Octylphenols
- PAHs
- Pentachlorobenzene
- Pentachlorophenol
- PFOS
- Quinoxyfen
- Simazine
- Terbutr yne
- Tributyltin compounds
- Trichlorobenzenes
- Trichloromethanes
- Trifluralin
Of these, 44 are organic and are collectively known as the POPs.
Some typical pollutants we analyse include the following:
- Cypermethrin
- Hexabomocyclododecane (HBCDD)
- PFASÌýEU DWD list of 20
- PFASÌýUK DWI list of 47
- PFOS and PFOA to WFD EQSD levels
- Tributyltin (TBT)
- Glyphosate and AMPA
- Steroids
- Surfactants including nonylphenols and octylphenols
- Pharmaceuticals
- Heavy metals total and dissolved
- Low level hexavalent chromium
- Low level mercury
- Flame retardants
- Antimicrobials
- Olfactory contaminants
- Chloroalkanes & Polychloronaphthalenes
- Routine Inorganics
- Microbiology
- Chlorophyll and phaeophytin
- Dechloranes & Siloxanes
- Phthalates
- PAHs and PCBs
- Endocrine disruptors
- Personal care by-products
- Insecticides
- Herbicides
- Fungicides
- Algicides and biocides
- Phenols
- Chelating agents (EDTA, NTA)
- Disinfection by-products (Nitrosamines, THMS, haloacetic acids, chlorate, chlorite, bromate)
- Perchlorate
- Triclosan
Our accreditation
![PFAS Water Locations 5.0](/media/ppfj03iw/pfas-water-locations-50.jpg?width=800&height=800&quality=100)
Ever wondered how much PFAS is in your home tap water?
We have been asked a number of times by our colleagues what the levels of PFAS are in our household tap water. In order to assess this, we decided to allow our staff to take home a PFAS testing kit, which consists of a certified clean HDPE sampling bottle with the instruction to run their tap for 2-3 minutes and then take a sample of water and return it to our laboratory, so that we could analyse it by our accredited tap water method.
Click the link below to find out the results of the study!